Triumph T100 - Kellermann Atto LED Install

Kellermann Motorcycle Lights are superior in quality, compact and really grab you attention, not to mention adding to your bikes aesthetics!

The Kellermann Atto LED 3 in 1 indicators are perfect for a super sleek minimalistic look, UKCA/CE approved, incorporating Stop/Tail/Indicator in a unit measuring 5mm x 5mm.

To mount the Kellermann Atto LED units you will need M4 size holes. The units come complete with a traditional nut and an additional heat sink nut. For a neat and reliable install, we used the corresponding female plug for the Triumph T100 wiring loom, that connects directly to the male plug installed on the motorcycle loom, as seen below. This method allows the wiring to be easily crimped into place, requring no soldering or hot work. 

If you're installing the Kellermann Atto LED units yourself, the wiring diagram below should save you some time.
Key:

BRAKE - Brake Lights (Red/Grey)
N/A - Not In Use
IND (R) - Right Indicator (Grey)
IND (L) - Left Indicator (Grey)
LIVE/TAIL - Number plate light (Red) & Tail Lights (Grey/White)
GROUND - Negative feeds (Black) 

Heatshrink and cable ties have been used to keep the cables together, avoiding any future abrasive damage and ensuring a neat installation. 

To comply with UK MOT law you will need to fit a UKCA/CE approved number plate illumination light alongside the Kellermann Atto LED's, which is wired to the TAIL light pins of the 6 pin plug (LIVE & GROUND), to ensure it is illuminated when the ignition is on. 

 
The final step, when installing Kellermann Atto LED's on the Triumph Bonneville T100 LC, was to select setting 4 on the dash 'information' screen, to ensure a UK MOT compliant flash rate, eliminating hyperflash.  

PLEASE NOTE: The information in this article is to be used as a guide only. If you are not a trained or a competent mechanic, please instruct a professional to carry out the work on your behalf.